Welcome to the Cave Diver's Forum.
+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1

    Default Always Analyze!!!

    Picked up a 3L o2 bottle from a vip the company let me know they they pumped 500lbs of nitrox in the bottle. Brought the bottle to a Tec shop down the street and advised them the bottle was just vip and there is 500 lb of nitrox in it. keep in mind this bottle is marked 100% 02 ......... i advised the shop of the nitrox in the bottle and even told them to empty it. They took it in the back and soon returned with the bottle advising me it was full with 02....... Analyzed it this morning to find it at 80% they never emptied the nitrox or analyzed it! and yes i checked my analyzer with a known 02 bottle to be sure........
    This shop is very familiar with ccr's and know 100% o2 is a must.
    Be safe, and ANALYZE!!!!

    The second mouse gets the cheese!

  2. #2
    Member
    Join Date
    Oct 2000
    Location
    Georgia
    Posts
    24,000

    Default

    You should have dumped the nitrox before you went into the shop.

    Forrest Wilson (with 2 Rs)
    Any opinions are personal.
    Sump Divers

  3. #3

    Default

    Agree..... figure when I told the fill man that he would have....but I caught it.

    The second mouse gets the cheese!

  4. #4
    Member
    Join Date
    Jul 2010
    Location
    Tulum, Mexico
    Posts
    483

    Default

    I realized that I had forgotten my analyzer at home when I was about to put the reg on my 50% bottle.

    "It's OK," I decided, "I mixed this bottle myself. Of course it's just right."

    But some little voice in the back of my head started nagging right away.

    "Hey Dave," I asked the mate, "Let me borrow your analyzer for a second."

    See, that wasn't so hard... aaaaaaaaaaaaaaaaaaaaaaaand... it was 80%

    I was very glad I didn't switch to that at 70 feet. I am also glad that I have that little voice in the back of my head to remind me when I'm being a dunce.


  5. #5
    Member
    Join Date
    Nov 2011
    Location
    atlanta
    Posts
    284

    Default

    Did you confirm with a different analyzer that it was only 80%? First inkling I had my sensor was bad was when it read 80% on my O2 bottle. Sure thing, it was 100% when checked with a good one.


  6. #6
    Member
    Join Date
    May 2014
    Location
    Greenville, SC
    Posts
    1,675

    Default

    Quote Originally Posted by LMN View Post
    Did you confirm with a different analyzer that it was only 80%? First inkling I had my sensor was bad was when it read 80% on my O2 bottle. Sure thing, it was 100% when checked with a good one.
    why you should dual point calibrate and verify linearity


  7. #7
    Member
    Join Date
    Jun 2005
    Location
    Chelsea, VT
    Age
    68
    Posts
    4,050

    Default

    A principle of critical care nursing that crosses very nicely to cave diving: If it crosses your mind even for a moment to double check something, double check it. Don't talk yourself out of confirming something important because you're tired, or in a hurry, or have to pee, or you don't want to hold other people up...the little voice in the back of your head that Roger mentions is there for a reason.


  8. #8
    Member
    Join Date
    Nov 2014
    Location
    Cedar Park, TX
    Posts
    328

    Default

    And that's why I blend my own gas in the garage. And because I don't trust even myself that's why I analyze before every dive.

    When I was a recreational diver I thought that was a bit overboard.. I've since changed my tune.


  9. #9
    Member
    Join Date
    Jun 2005
    Location
    Chelsea, VT
    Age
    68
    Posts
    4,050

    Default

    Analyzing your gas - a quick, easy, convenient way to avoid inadvertent suicide.


  10. #10
    Member
    Join Date
    Sep 2013
    Location
    Las Vegas, NV.
    Posts
    101

    Default

    Quote Originally Posted by tbone1004 View Post
    why you should dual point calibrate and verify linearity
    Also check the battery. Low voltage gives some "off" readings as well.

    Sent from my XT1650 using Tapatalk



 

Similar Threads

  1. Do You Analyze Your Gas for CO?
    By skip in forum Polls
    Replies: 140
    Last Post: 04-18-2015, 06:38 PM
  2. Who DOESN'T analyze their gas?
    By IowaCaveDiver in forum Main Forum
    Replies: 84
    Last Post: 07-10-2013, 07:20 PM
  3. Analyze this..
    By Howard in forum Main Forum
    Replies: 8
    Last Post: 09-14-2009, 05:48 PM
  4. Do you analyze?
    By Line Squirrel in forum Polls
    Replies: 29
    Last Post: 07-22-2008, 11:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts