WTB 7/8 thread L/R valves

[ffdiver5597]

I know this comes up everyone once and awhile but I just acquired some pst 100s.

So if you have a set I'll buy it.

[kwinter]

Did they come with nothing in them? Because if they came doubled up, there is someone shopping for a 7/8 manifold that might have some single valves. Otherwise I might have a source. I'll check and let you know. I think I have one single in my basement.

[ffdiver5597]

I have single standard titled valves on them. I'm looking to sidemount these so I'll buy the manifold but need the plugs.

[kwinter]

Danny, the problem with that is most of the manifolds for 7/8 didn't have plugs available. I think Sherwood probably was the most common manifold, and there were no plugs. I think OMS made a 7/8 and did have plugs. But finding single Left and Right valves with plugs is gonna be impossible. Someone posted somewhere that Edd was having a special run made of 7/8 valves. At least that's what my addled brain remembers.

[ffdiver5597]

I just read that post too. Hopefully that comes through and I'm going to stock up on some valves. Never know when you will come across pst 100s.

[kwinter]

I have 7 PST 120s that form my air bank.


iPhone. iTypo. iApologize.

[Brent]

In the early to mid 90's both Dive Rite and Sea Elite sold the 7/8 UNF 300 BAR manifold. These are "somewhat" common, at least here in Florida. I have three sets myself and at least 6-8 plugs should I ever decide to separate the manifold. ( not for sale! ) Should you be lucky enough to find a manifold for sale, give me a call and I'll see if I still have the plugs available.

[bamafan]

I bought some from this shop about 2 years ago. They are the Oms ones and not what I wanted but after looking for a few weeks it is all I could find. I would call them if you are interested.

https://www.a1scubagear.com/oms-dive...-8-thread.html