putting together a set of doubles, have the bands but no bolts. LP 85's. what are common size bolts and lengths will work for this?
Welcome to the Cave Diver's Forum.
hardware for doubles
putting together a set of doubles, have the bands but no bolts. LP 85's. what are common size bolts and lengths will work for this?
give a man a fish and he eats for a day: teach a man to fish and he will drink beer for a lifetime............
www.lauderdalediving.com
Buy a set made for 7.25" cylinders and choke them up a bit if you have to. Some LP 85's are 7.25", some are less.Originally Posted by ltb7733
Last time I bought hardware I went to Fastenal and bought a 5 ft hunk of 5/16" allthread, brought it home and cut it up with a porta-band, then rounded the ends off nice. The five foot piece was cheaper than a set made up, and now there is a spare if I need (or four).
Mark
As said, much easier to get some 5/16 threaded rod.
The shoals are there still, the winds howl loud, the rain beats down, the waves burst strong. Some night, in the chill darkness, someone will make a mistake: The sea will show him no mercy. John T. Cunningham
Posting Permissions
Reply With Quote
Bookmarks