I am looking for a stainless backplate and wing. May be interested in an aluminim plate as well.
I am looking for a stainless backplate and wing. May be interested in an aluminim plate as well.
Diving, Therapy for all that is wrong!
Hi,
I have an Apeks backplate & wing for sale. Don't need them as the person for whom they were bought didn't like them. Both were used minimally for 5-10 dives in cave class.
Descriptions are from Apeks.
-------------------
Apeks WTX 60 Wing: $190 (Paid $385) Used 5 dives for cave diving class.œ
• Outer bag constructed out of ArmorshieldTM Cordura to resist abrasion and fading.
• Inner bag constructed from mil-spec welded fabric. This is the same fabric
used in survival vests worn by US fighter pilots.
• Inner bladder protected from zipper with V-diamond rubber.
• Pull dump on inside lower left
• Optional pull dump may be added to inside lower right
• Highly efficient drains empty water quickly aftœer the dive.
• 3 upper grommets allow various height settings coupled with a
lower slot that compensates for misaligned band bolts.
• The airway comes off the top back centre of the cell. A safety
cable inside the elliptical hose prevents hyperextension of the corrugated hose.
• Features the Apeks technical inflator with brass buttons
----------------------
Apeks Stainless Steel Backplate: $79. (Paid $165). Used 5 dives yada, yada, yada.
• Made of 316 stainless steel.
• Weighs approx 5 lbs (2.2 kg).
• 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot.
• 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned.
• 2” wide crotch strap slot.
• Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories.
• Textured, electro-plate finish and a laser-etched Apeks logo round out the look of the plate
-----------------------
PAYPAL ONLY. Add $10 per item for shipping via UPS.
I have an aluminum dive rite backplate slight discoloration due to some salt water use. make me an offer if you are interested. It also has a small harness on it cut to the smallest size so the straps are unadjustable but that would prob not fit you.
I have Dive Rite Super wings for sale. Only used a few times, in new condition. Only asking $100 plus actual shipping. Have pictures if interested.
Joe
Bookmarks