FS 100cf Aluminum cylinder o2 clean

[Dacy]

SCUBA Distributors 100cf aluminum cylinder born 02/09. I bought it new and have o2 cleaned it from the beginning. I'll VIP/o2 clean it before it goes to its new home, plus fill it with 32%. It currently has a yoke valve, but I can swap it for a DIN if that's your preference. It rates 100cf @ 3300 psi. All of the marks are cosmetic, the cylinder wall is smooth as a baby's butt. I've been the only one to use it, mostly for instructing open water students.
I'd like $150 for it. I'm in Tallahassee until Thursday, when I will be driving down to Orlando and flying to Texas for Christmas. I can bring it along if that's an easier pick up/drop off area (or along the way).

[Superlyte27]

Not picking on you or your tank, but you'll probably have better luck on Craigslist or Scubaboard with an AL100

[Sludge]

Not picking on you or your tank, but you'll probably have better luck on Craigslist or Scubaboard with an AL100

I've never seen a cave diver use an AL-100, either.

[Dacy]

no, not many cave divers, but there are a few on here that may be interested, like instructors. Wanted to throw it out here first. I'll try elsewhere

[Superlyte27]

Instructors might get better deals than that
You'll have better luck selling this tank to the less experienced.

[Sludge]

Again, this is a tough crowd...