FS: SI TECH Dry Glove System for any drysuit. Removable

**navycaver** · 04-20-2016 11:22 PM

I have had it for just under a year and it has about 20 dives on it in the Pacific Northwest.
If I was not moving back to warm 68-72 degree caves

I would be keeping it.
I have used these gloves and liners in water down to 46F and been good.

This is the SI Tech "Quick Glove Rings" System.
It comes with everything needed to install it on your existing wrist seals, including instructions and all original packing.
It also comes with gloves and liners.

The following items are included:
- Large rings for the wrist seal on your suit
- Two Spanner ring sets. Different sizes for use on various thicknesses of wrist seals. (green and black) These will work with latex or neoprene seals.
I used it on BARE Latex seals.
- Quick Glove Rings and spanner rings(blue) to attach to the gloves.
- Set of spare O-Rings
- 2 dry gloves
- 2 liners

Once the rings are on the wrist seals you simply push the Glove Rings onto the Plastic ring on the wrist seals and the o-rings keep it water tight.

To me the big advantages of this system are.
1. You can remove it and dive with your installed wrist seals.
2. If you tear a glove only your hand floods not the entire suit.

The Quick Glove Rings set sales on line for about $115 and the gloves and liners go for $35-$50.

$85 shipped in CONUS
Please PM or email direct with any questions, dan2dive@gmail.com