Welcome to the Cave Diver's Forum.
Closed Thread
Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Oct 2004
    Location
    Old Town, Florida
    Posts
    178

    Death of a Cave Diver Arrow New Salvo 10W HID Canister Light - Read to pick up in NF - $500

    Here in North Florida I have a brand new Salvo 10W Hid Canister light with focus head.

    Links to pictures of this light are below.

    I acquired this light when I used to have the dive stores. I was going to use it but actually never put it in the water as I never needed anything more than the 2 50W hid lights I already was using.

    So... this light has been around for a few years but never been in the water. I am ready to get it off my bench.

    A charge has been maintained on the battery on the same bench with my other Salvo HID lights so the battery pack is just fine.

    $500 takes this brand new light. I will meet you anywhere in the High Springs or near surrounding area all the way to Gainesville for delivery.

    I will keep it on here for a week and if it doesn't sell I am putting it on eBay so don't take long to contact me if you want it.

    http://techniquest.net/ebay/hold/light1.jpg
    http://techniquest.net/ebay/hold/light2.jpg
    http://techniquest.net/ebay/hold/light3.jpg
    http://techniquest.net/ebay/hold/light4.jpg
    http://techniquest.net/ebay/hold/light5.jpg

    If you want it PM me.


  2. #2
    Member
    Join Date
    Dec 2004
    Location
    Sunshine State
    Posts
    394

    Default

    What's the OD and length of the canister?


  3. #3
    Member
    Join Date
    Oct 2004
    Location
    Old Town, Florida
    Posts
    178

    Default

    Top of lid to base is just over 8". If I run a fabric table AROUND the canister it also is about 8". Running across the base it is about 2 1/4 "

    This is what I would call a "slimline" style canister. If you want any more specific measurements let me know.


  4. #4
    Member
    Join Date
    May 2011
    Location
    South Florida
    Posts
    75

    Default

    What is the rated burn time?


  5. #5
    Member
    Join Date
    Oct 2004
    Location
    Old Town, Florida
    Posts
    178

    Default

    To be honest, I am not sure. I have only run it for a few minutes to test before I posted this thread. I suppose I could burn test it and place the light head in a bucket.

    The light comes with a charger BTW. I forgot to mention that fact.


  6. #6
    Member
    Join Date
    Oct 2004
    Location
    Old Town, Florida
    Posts
    178

    Default

    UPDATE:

    I will consider offers on this if you don't want to go the full $500.

    Also, I will consider trades.... items of interest to me for trade would include:

    Steel tanks in good shape, in hydro pref configured for sidemount
    Full Retail Authentic Microsoft Software in full retail packaging. I can go back as far as Windows XP as long as the software is intact, in retail packaging (I don't want OEM stuff) and in good shape.
    Firearms and Ammo

    PM me for discussion (amounts I could credit for items, etc) Thanks.


  7. #7
    Member
    Join Date
    Oct 2004
    Location
    Old Town, Florida
    Posts
    178

    Default

    SOLD - Thanks everyone.



 

Similar Threads

  1. FS: Salvo 10w HID light
    By L.A. in forum Gear Exchange
    Replies: 4
    Last Post: 06-26-2010, 08:18 PM
  2. 10W HID canister light (Dive Rite)
    By Skybluewater in forum Gear Exchange
    Replies: 5
    Last Post: 06-18-2010, 08:29 PM
  3. Salvo 10W HID Light
    By Rick Palm in forum Gear Exchange
    Replies: 3
    Last Post: 11-14-2007, 06:15 AM
  4. WTB 10W HID canister light
    By gr8tfuldiver in forum Gear Exchange
    Replies: 4
    Last Post: 08-09-2005, 11:10 PM
  5. FS: Diverite 10w HID canister light
    By Tegg in forum Gear Exchange
    Replies: 1
    Last Post: 12-28-2004, 04:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts