Trade?

[wetagain]

done deal!

[EEL]

Is that the manifold you asked about in another thread? If so, I do not think it is a scubapro. That appears to be a dive rite and the plugs should be avaliable. If it's not then do not listen to me.

I should learn to keep my thoughts to myself.

Cheers,

Mark

[icestac]

PM sent.

[Sludge]

The manifold pictured above is NOT a Scubapro. They never marketed a 300BAR.

[Line Squirrel]

Looks like a sea-elite but not certain.

After buying stuff and selling it for something else, only to re-buy it again, my 2 cents would be to buy a couple plugs so you can make (2) seperate valves.

Plugs are cheap enough.

Keep the manifold/crossover piece, it's not very big, dosen't eat much and it's paid for. Tuck it away somewhere, wrap it in some paper towels or a heavy rag/towel to protect the threads and put it in a zip-loc bag (or similar) you may need it someday. You aren't going to get much $$$ for it anyway but it will cost you $$$ if you decide you need one

[amphipod06]

Looks like a sea-elite but not certain.

After buying stuff and selling it for something else, only to re-buy it again, my 2 cents would be to buy a couple plugs so you can make (2) seperate valves.

Plugs are cheap enough.

Keep the manifold/crossover piece, it's not very big, dosen't eat much and it's paid for. Tuck it away somewhere, wrap it in some paper towels or a heavy rag/towel to protect the threads and put it in a zip-loc bag (or similar) you may need it someday. You aren't going to get much $$$ for it anyway but it will cost you $$$ if you decide you need one

Mike is right.

The plugs for a Sea Elite are about $10 each from Divers' Supply and they have an 800 number, if you are in FL you get your stuff next day as they ship from GA...

Dive safe,

Celia