Sta

[Me]

Okay....I need a STA. I am tired of switching my backplate back and forth between wing types, as I currently have a single tank wing that is meant to be used without a STA. This is a PITA, rethreading the cam bands & changing bolts from doubles, etc.

Okay....I've been looking around and what I find are stainless steel STAs. These booger up the paint job on my tanks. My buddy has one that is not stainless (abs maybe?), but I'll be danged if I can find one now.

Anybody know of a STA of another material currently available?

[FW]

You could glue a strip of neoprene on the SS STA, to protect your paint.

[Scubastud16]

SS is the most popular. I think Dive Rite used to make one from ABS. I like the neoprene suggestion though!

[DR2K]

Maybe the Oxycheck Soft STA will help you.

[flyczek]

I made my own out of a fiberglass U bracket, some stainless bolts and wings, and two scubapro cam straps. It was cheap and works fantastic, however, you'll have to carry some lead.

[skip]

Halcyon makes a single tank wing with STA integrated; it's soft and there is no metal to work through the neoprene over time. check with extreme exposure in high springs.

-skip

[jackass]

Made my own out of black abs from home depot. Cost less than 10 dollars, took an hour to get just right.

[Me]

Halcyon makes a single tank wing with STA integrated; it's soft and there is no metal to work through the neoprene over time. check with extreme exposure in high springs.

-skip

That's the wing and plate I have.....tired of switching the bolts and cambands back and forth from single tank config to doubles.

Maybe I'll just buy a second plate and be done with it.

[JDostal]

Just get some PVC Pipe... cut it lenghtwise.

Drill some holes in it. Cut some slots to hold the bands.

Instant STA They work great.