FS: Silent Submersion UV-26 with UV-18 tube

[MikeH]

- UV-26 with new Genesis batteries, burn test at 95 minutes(same as Rodney's test)

- UV-18 tube/batteries, burn test at 45 minutes(new batts test at approximately 50 minutes)

- Interacter fully automatic charger

- Burn tester(simulates maximum draw that the motor can pull, equivalent to running at top speed)

$3300 firm. Call or email if interested. I'm not willing to separate the tubes.

This is the second listing for this scooter. If it doesn't sell in 5 days or so I'll be putting it up on eBay. I've had several people say they wanted it, but none came through.







Mike
407-923-3375 Cell
Aviatrr@aol.com

[DeWayne]

Hey Mike, are you willing to sell your burn tester separately?

How much is it worth, DeWayne? Maybe we'll go in on the whole kit together.

PM me.

[DeWayne]

PM sent Sludge

[MikeH]

Hey Mike, are you willing to sell your burn tester separately?

Sorry, but no. As far as I'm concerned, a method for testing the burn time of the batteries is an integral piece to any item such as this(or a light)...so I'll keep it with the scooter.

They're not too difficult to build...finding the resistors seems to be the hard part these days.

Mike

[John L.]

Is the burn tester available in oak instead of pine?

Mike, when you put this on eBay, please PM me the link. That will give me a little more time to procure the funds (I expect to unload about $800 worth of stuff in the next week or so).

Russell

[DeWayne]

Hey Mike, are you willing to sell your burn tester separately?

Sorry, but no. As far as I'm concerned, a method for testing the burn time of the batteries is an integral piece to any item such as this(or a light)...so I'll keep it with the scooter.

They're not too difficult to build...finding the resistors seems to be the hard part these days.

Mike

No problem there Mike, I can clearly see your point. Thanks for the reply.

[Line Squirrel]

How much is it worth, DeWayne? Maybe we'll go in on the whole kit together.
PM me.

I'll get in on this for the 18 tube if you don't want it