Halcyon Manifold and 8" Bands w bolts

[CowMan]

Halcyon 300 bar manifold and 8" Highland bands and bolts. These were on my LP95s and the tanks have been sold. $145.00 and I'll pay the shipping via USPS within continental US. Located at beautiful Lake Tenkiller in Oklahoma if you want to pick them up!

[Fivehorsejohnson]

Are the bands 2.5" or 3" wide?

[CowMan]

I'll measure them tomorrow

[CowMan]

Fivehorsejohnson the bands are 2.5" wide

[Fivehorsejohnson]

Thanks but I'm looking for 3".

[CowMan]

Any offers? I can separate the bands from the manifold. I thought there were guys out there that preferred the 300 bar manifold

[FW]

Any offers? I can separate the bands from the manifold. I thought there were guys out there that preferred the 300 bar manifold

The problem with a 300 bar manifold is that it requires 300 bar regulators.

[CowMan]

Educate me please Forrest, The regulators I'm familiar with, Dive Rite and Scubapro's, will work just fine with 300 bar. The only difference being on a 200 bar valve you have several threads showing and on a 300 bar you don't have any threads showing or very little. So are there some first stages being built with not enough thread depth to seat down into a 300 bar? Or am I way off base ?

[JLH]

That is correct. 300 bar regulators will work with 200 bar valves, 200 bar regulators won't work with 300 bar valves. More threads on the 300 bar.

[FW]

Educate me please Forrest, The regulators I'm familiar with, Dive Rite and Scubapro's, will work just fine with 300 bar. The only difference being on a 200 bar valve you have several threads showing and on a 300 bar you don't have any threads showing or very little. So are there some first stages being built with not enough thread depth to seat down into a 300 bar? Or am I way off base ?

There are a lot of 300 bar first stages, but they aren't all 300 bar. Especially older models.