WTB: MRS wing and sidemount harness

[Northernone]

I'm looking for a minimalist rig for sidemounting al80s and before buying the components retail or taking the diy approach I'm seeing if anyone has the kit in their spare gear bag they'd part with used.

WTB:
6-10l Dromedary w/ OPV valve, inflator
Harness plates, d rings and webbing

Or

Pretty much any compact and inexpensive sm wing system. Just enough (sub 20lbs lift) for a couple al80s when I'm south in a 3mil and won't cost a fortune if it gets lost/stolen/damaged in my travels.


Cheers!
Cameron

P.s. At this stage I'm a vacuum for used gear so if you have spare reels, regs, spgs, trim pouches or hardware at the same time I'd be receptive.

[ffdiver5597]

I posted plates for sale


Sent from my iPhone using Tapatalk

[Glenn893]

I have a used Xdeep stealth 2.0 that I would like to go for $300 US (negotiable) if you're interested. By the time you make your own (and ice done that as well), it's an easy $300.

PM or email me at glenn.sawyer@me.com.

[Glenn893]

Next time I'll proof read...
*would let go...
*and I've done...

[Northernone]

That's certainly an ideal rig! Unfortunately out of my budget for travel gear. Thanks for the offer! And 1400km away we are practically neighbors!

[Northernone]

I posted plates for sale


Sent from my iPhone using Tapatalk

Thanks for the heads up! I'll check it out.

[Glenn893]

That's certainly an ideal rig! Unfortunately out of my budget for travel gear. Thanks for the offer! And 1400km away we are practically neighbors!

True enough fellow Canuck... You can use my snowblower anytime you need it.

[patpicos]

Glenn, you are changing rigs again!?

@OP, have a look at:
http://www.diveequipmentco.com/bcd-s/sidemount.html

http://www.diveequipmentco.com/bcd-s...der-22-16.html
http://www.diveequipmentco.com/bcd-s...harness-2.html

[coldwaterjake]

Glenn, you are changing rigs again!?

@OP, have a look at:
http://www.diveequipmentco.com/bcd-s/sidemount.html

http://www.diveequipmentco.com/bcd-s...der-22-16.html
http://www.diveequipmentco.com/bcd-s...harness-2.html

I like this rig. It has enough lift for sm80s. I bungie tied the bladder across the lower back and it doesn't balloon up.

[patpicos]

I like this rig. It has enough lift for sm80s. I bungie tied the bladder across the lower back and it doesn't balloon up.

It is decent for mexico diving. I didnt use any weight w/ AL80s and 5MM wetsuit or drysuit with only base layer. Bit negatives w/ 1 stage. Didnt attempt 2 stages.

I looped my bungees thru the eyelets at the top to reduce ballooning in mid-torso. The bag needs a better shape as it does balloon quite a bit when negative (aka when bladder full)