Metal Connection for Rescuean pod kit

[ocean2015]

I'd like to create a small, all metal connection for the rescuean pod kit (rescuean.com) . The pod typically attaches to an LP hose or to a regulator hose using a connector that converts the regulator connection into a bc connection. I would just like to have a small compact connector for the pod because I don't use a bc hose on my set up and would rather not remove the regulator from my regulator hose. Does anyone know of a combination of metal connectors that would allow this?

[tbone1004]

i'm very very confused by this.

You should put an inflator hose on your setup btw, if anything to be able to check the IP. The only other option I can think of is to put a QD on your second stage, and then pop the second stage off and plug the pod in

[ocean2015]

Thanks, what's a QD btw?

[tbone1004]

quick disconnect, similar as your BC connection just higher flow. Same connection they use for Air2's etc