Hi All,
Not cave trained yet but have lurked a bit for a few years. Hope you don't mind me posting this here...
For sale I have a made to measure cave cut DUI Signature Series FLX Extreme drysuit. I purchased this suit in Summer of 2013. It has approximately 55 dives on it. I transitioned to doubles last year and unfortunately the suit is just a little too snug on my left side (for some reason my left shoulder/chest/arm area is a little bigger than my right even though I am right handed). I am having a new suit made with some tweaks to the fit.
I would say overall the suit is in excellent condition. It's always been rinsed/zipper waxed after every dive. It's been stored on a drysuit hanger. My first dive of this season I noticed a very small leak in the right turbo sole which I patched with cotol/aqua seal and it's been dry since. Save for that small leak the suit has been absolutely bone dry.
I purchased the suit with standard latex seals but added the Si Tech permanent oval wrist system which I've been very happy with. You guys probably know this but it's 1) low profile 2) allows you to swap your own seals at the dive site 3) allows you to use silicon seals (cheap - $50 a pair) 4) allows you to use any seal available as opposed to a system like ZipSeals where you need to have the proprietary seal 5) when using dry gloves (you would need to use the Si Tech Antares system, which been using and love or the newer Virgo system) you have the option of leaving the wrist seal in place for redundancy in case of a glove tear - you can also remove the seal when using dry gloves for extra warmth.
When I had the wrist system installed the shop accidentally installed the Si Tech Neck Tite system which I hated. I had them remove the neck system and install a standard latex neck seal which is what is on there now. While they had the suit I think during leak testing they got some adhesive on the suit near the valve. Tried to show this in the picture. Might be possible to remove this with some kind of solvent but I have never looked into it.
Other details:
-Turbo soles are XL - I typically wear a size 11-12 shoe
-CLX overlay design with red tough duck
-2 Halcyon Explorer pockets
-Halcyon balanced pee valve (always flushed with vinegar and water after each dive)
-Apeks high profile exhaust valve
-Cut to accommodate XM450 undergarment or equivalent
I am 5'9 1/2 and was about 175 when I was measured for the suit. I'm around 165 now and waist is 32". I don't have the original measurements but I waiting to see if DUI can send them to me. If not I will have someone measure me and will post those. I believe the cut is reasonably close to a stock medium.
I am located in Somerville, MA. If you are local (don't think too many on this board are) you are welcome to stop by and try the suit on. Will ship anywhere at buyer's expense. I am looking to get around $1500 for the suit. I paid close to $3700 altogether. Will take cash or PayPal for payment (as gift to avoid fees or buyer pays fees).
Please PM me if you are interested, have questions, want additional pictures etc.
Thanks!




Bookmarks