Welcome to the Cave Diver's Forum.
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: tumbling media

  1. #1
    Member
    Join Date
    Oct 2008
    Location
    Caldwell, Ohio
    Age
    64
    Posts
    439

    Default tumbling media

    I have a steel 72 with some lite rust inside, what media and where can I order it from?

    Thanks


  2. #2
    Member
    Join Date
    Nov 2009
    Location
    Alpharetta, GA
    Age
    65
    Posts
    1,027

    Default



  3. #3
    Member
    Join Date
    Oct 2004
    Location
    Right on the Ragged Edge
    Posts
    3,634

    Default

    For tumbling, Mick Jagger would use dice, wouldn't he?

    "Have you ever noticed
    When you're feeling really good
    There's always a pigeon
    That'll come shiat on your hood?" John Prine 4-7-2020

    "Into the blue again; in the silent water
    Under the rocks, and stones; there is water underground" Talking Heads

  4. #4
    Member
    Join Date
    Dec 2004
    Location
    Murfreesboro, Tennessee
    Posts
    3,270

    Default

    no, he'd use a little LSD, a little crystal meth, and a bit of wild turkey.

    serially though, some have used pea gravel from home depot.

    light rust may best be removed with a whip connected to a drill.

    skip

    "Learning the techniques of others does not interfere with the discovery of techniques of one's own." B.F. Skinner, 1970.

  5. #5
    Member
    Join Date
    Mar 2007
    Location
    La Crosse, WI
    Posts
    37

    Default

    Get in touch with a local metal finishing supplies place and you may find the aluminum oxide significantly cheaper. It likely won't be a stocked item, because the mesh is much larger, (which would I believe make it a smaller number for example sorb for a rebreather the 4-8 is a larger grain than the 8-12), than is normally used in industrial applications. I bought a pile of the stuff several years ago for around $1/lb. IIRC you'll need 25-30lbs for a 72.


  6. #6

    Default

    You can get some cheap media, that's big, from harbor freight. it's not intended for this but it works surprisingly well (besides being difficult to get out).

    http://www.harborfreight.com/5-lbs-r...dia-93832.html


  7. #7
    Member
    Join Date
    Dec 2010
    Location
    Mobile, AL
    Posts
    672

    Default

    Quote Originally Posted by NorthWoodsDiver View Post
    You can get some cheap media, that's big, from harbor freight. it's not intended for this but it works surprisingly well (besides being difficult to get out).

    http://www.harborfreight.com/5-lbs-r...dia-93832.html
    i had seen this stuff and was wondering how well it would work, thanks


  8. #8
    Member
    Join Date
    Oct 2000
    Location
    Georgia
    Posts
    24,000

    Default

    FWIW, I have a bunch of media that is difficult to get out, if anyone wants to buy it cheap

    Forrest Wilson (with 2 Rs)
    Any opinions are personal.
    Sump Divers

  9. #9
    Member
    Join Date
    Oct 2008
    Location
    Caldwell, Ohio
    Age
    64
    Posts
    439

    Default

    Quote Originally Posted by FW View Post
    FWIW, I have a bunch of media that is difficult to get out, if anyone wants to buy it cheap
    Tell me more


  10. #10
    Member
    Join Date
    Oct 2000
    Location
    Georgia
    Posts
    24,000

    Default

    Quote Originally Posted by darkdiver211 View Post
    Tell me more
    You might want to ask gasdiver how long it took him to get it out of the tank. The media is short "rods" of stone, about 3/8" dia, and 3/4" long. They are pretty easy to get into the tank, but jam up when you try to dump them out

    Forrest Wilson (with 2 Rs)
    Any opinions are personal.
    Sump Divers


 

Similar Threads

  1. The Media Turned Loose on Walmart (Part 3)
    By Miner in forum Main Forum
    Replies: 5
    Last Post: 11-05-2005, 07:35 AM
  2. The Media Turned Loose on Walmart (Part 2)
    By crazyduck in forum Main Forum
    Replies: 0
    Last Post: 11-04-2005, 07:34 AM
  3. The Media Turned Loose on Walmart
    By Jim Wyatt in forum Main Forum
    Replies: 1
    Last Post: 11-03-2005, 07:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts