Angled valves?

[NorthWoodsDiver]

The angled valves are available in some configurations. I called the manufacture, Genesis, and they had 7 left hand modular valves in stock with the smaller 7/8 thread. I ordered two for a customer. They reported having stock of over 250 of the 3/4" thread (not sure how many of each side). None have plugs. If you would like the valves, call me and I will order them for you but I can't help with plugs, I'm out.

I don't know retail price for the 3/4" but the 7/8" were not cheap, about $80 each.

850-745-8208 ask for Travis, I will try and help as best I can. T

[CaveMD]

The angled valves are available in some configurations. I called the manufacture, Genesis, and they had 7 left hand modular valves in stock with the smaller 7/8 thread. I ordered two for a customer. They reported having stock of over 250 of the 3/4" thread (not sure how many of each side). None have plugs. If you would like the valves, call me and I will order them for you but I can't help with plugs, I'm out.

I don't know retail price for the 3/4" but the 7/8" were not cheap, about $80 each.

850-745-8208 ask for Travis, I will try and help as best I can. T

They told me they dont have any right hand in either size, and no plugs at all. I've found at least 5 shops out of the 30 or so I called that had the left hand valves in 3/4" and would sell them for ~$50-60. NONE of them had any right hand valves OR reverse threaded plugs. Of those 5 all of them had been sitting on a shelf collecting dust for years, 2 of them I don't think had sold any sherwood/genesis stuff at all in years.

[CaveMD]

I would be interested in 3 sets.

valves, plugs, or both?

[gasdiver]

Plugs. I have 3 of the manifolds so l don't need the valves.

[diveongas]

I love angled valves, got three sets of tanks that all use Genesis 3/4" threaded valves.

They put your SPGs right where they need to be!

[CaveMD]

They put your SPGs right where they need to be!

They really do. I'm trading out my 95's for 108's because I plan on doing more mix dives and I really wanna put the angled valves on them. They were too perfect the first time I tried them with my hp100's to go back.

[NorthWoodsDiver]

I have received confirmation that over 200 left hand valves are available to me, not sure about right hand. So if you want the angled valve, 3/4" thread, in Left hand configuration I can help you out. The other downside is no isolator plugs exist, if someone is making them then that problem is solved. Give me a call at 850-745-8208 if you are interested

[CaveMD]

I have received confirmation that over 200 left hand valves are available to me, not sure about right hand. So if you want the angled valve, 3/4" thread, in Left hand configuration I can help you out. The other downside is no isolator plugs exist, if someone is making them then that problem is solved. Give me a call at 850-745-8208 if you are interested

Only interested in matched pairs or if I find a single backwards valve and need a standard valve to match it.
Thanks though

Sent from my MB860 using Tapatalk