Welcome to the Cave Diver's Forum.
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Default FS: Steel 72, 12-08 hydro, DIN valve, probably o2 clean

    US Dives steel tank, from 1970. Hydro from 12-08, so it's good for two more years, almost 3. VIP is expired, but it was spotless inside when it was last vipped, and was only used a few times, from a reliable air source, so my guess is, it's still spotless. I do not recall if it was o2 cleaned when it was hydroed, but I do know it got a light tumble at that time. Genesis DIN valve.

    This has been sitting around for months, no use as a stage since I have started collecting 80's, works well for drying off parts that I o2 clean but I could really use another aluminum 40.

    So, I'd love to trade this for an aluminum 40. Don't need stage hardware, do need DIN valve. Might include a little bit of cash (or miller high life for a sweet tank. I'm also interested in a Scubapro G600 second stage. I think it might be worth around $90.

    And no, this doesn't have a viny lining. Tank boot has a crack so it comes off easily. Handy for storage and transport but slips off fast so no one knows you are a stroke who can't balance a rounded steel tank on flat surfaces, while you dive Can include the DIN donut if you remind me to dig one out, or can swap out a nice o2 clean yoke valve if you'd prefer.


    Quote Originally Posted by JJ1987
    "But nothing gets accomplished in sidemount!"

  2. #2
    Member
    Join Date
    Oct 2010
    Location
    Trenton, Fl.
    Posts
    145

    Default

    Where are you located? I'm accumulating a few steel 72's. If we can get this one to cave country, we might can make a deal.


  3. #3

    Default

    I'm in Miami, but make trips to cave country every few weeks. Will be up there March 5/6.

    Quote Originally Posted by JJ1987
    "But nothing gets accomplished in sidemount!"

  4. #4

    Default

    Sold.

    Quote Originally Posted by JJ1987
    "But nothing gets accomplished in sidemount!"


 

Similar Threads

  1. WTB Faber Steel 85's in hydro
    By Brian Kakuk in forum Gear Exchange
    Replies: 0
    Last Post: 07-07-2008, 10:53 AM
  2. FS PST Steel 95's New Hydro October 07
    By robohips in forum Gear Exchange
    Replies: 0
    Last Post: 10-20-2007, 07:43 PM
  3. Oxygen clean after hydro
    By cavehunter in forum Main Forum
    Replies: 12
    Last Post: 03-08-2006, 09:07 AM
  4. FS: Scubapro 200 bar DIN Isolation manifold O2 clean
    By amphipod06 in forum Gear Exchange
    Replies: 0
    Last Post: 11-16-2004, 12:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts