FS: DUI, Halcyon, Scubapro, Apeks, Dive Rite, etc……

[Kirk]

I put some items up for sale about a month ago, but some of them didn’t move, thus I’m reposting them with some adjusted pricing. The prices listed included shipping within the continental US. You can of course also pick the items up at my apartment in Minneapolis. I will eat the Paypal fees (or if you come to me, cash is king). Let me know if you have any questions.

DUI Thinsulate Ultra 400 Drysuit Underwear
Like new. Size medium. Only used a few times. $125 US Shipped.
http://i1199.photobucket.com/albums/...r/IMG_5746.jpg

Halcyon Explorer Wing – 55 lbs of Lift.
Well used, though still with life in it. I believe the bladder may have a very slow leak, for if full and left for a day or two, it doesn’t remain as firm. I recently replaced the inflator valve. $75 US Shipped.
http://i1199.photobucket.com/albums/...r/IMG_5719.jpg

Halcyon 18 Watt HID 9 Amp NIMH Lighting System
The explorer line is the newer line that comes with the gold plated banana plug connectors for a leak proof lid. This light is about three years old, and thus comes with a Welch Allyn bulb, and not the Brightstar, thus I think this actually draws 18 Watts, not 21 like their current lights with the Brightstar bulb. Other than the change in bulb, it appears that this lighting system is identical to that which Halcyon is currently selling, including the new version of the charger (the older version was junk). In addition to the complete lighting system, I've added two attachment points to the light head for attachment with a double ender boltsnap. I'll include a double ender, a hard case lined with plick and pluck foam for protection, 3 spare fuses for the charger, and a halcyon can cooler like foam sleeve for further protection of the light head. $850 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5820.jpg

Dive Rite 905 Drysuit – Size Medium “C”
This suit may be a few years old, but has seen very little use. It has always just been my backup suit, and thus has few dives on it. It is blue and black, back zip. Size Medium, or “C” with size 10 UK boots. The boots are the older, and most agree, nicer kind. Modifications I’ve made to it include adding a Kevlar crotch pad and the installation of 2 inch D-Rings in the thigh pockets. The neck and wrist seals have recently been replaced, as has the Si-tech exhaust valve. The limited work done to it has either been done by Mark Owens at Superior Drysuit Repair in Brainerd, Minnesota or Steve Gamble in Gainesville, Florida. $700 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5787.jpg

Apeks ATX 40 2nd Stage Regulators.
I’ve got 6 of these. All are black, with black faceplates. They’re all about a year or two old, and in great condition. Some of them may have never even been in the water (though I can’t tell which, for they all look the same). – I’ll let each one go for $85 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5789.jpg

Scubapro 1st Stage Regulators.
I’ve checked the intermediate pressure and submerged them in water while pressurized looking for bubbles. Everything appears to be in good condition with these Scubapro regs. All of these Scubapro 1st stages are yoke. They include:

MK 15 – just serviced - $80 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5793.jpg

MK 10 – The ambient ports are filled with environmental silicone - $60 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5796.jpg

MK 10 – Includes groove for SPEC boot, but doesn’t have the boot itself - $55 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5796.jpg

MK 10 – Includes groove for SPEC boot, but doesn’t have the boot itself - $55 US Shipped. http://i1199.photobucket.com/albums/...IMG_5797-1.jpg

MK 10 – Newer yoke, yet with older screw - $50 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5798.jpg

MK 5 – Older version, with small HP Port though with 4 LP Ports - $50 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5799.jpg

MK 5 – Older version, with small HP Port and just 2 LP Ports - $40 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5800.jpg

Oceanic Balanced Piston 1st Stage Regulator - DIN
I have a balanced piston Oceanic first stage (no model name, they really just marketed them as the “balanced piston”, though looks a lot like a Scubapro MK 10). This one is DIN. This regulator, however, should really be serviced prior to use, for it didn’t pass my leak test (bubbles coming from the seat retainer cap). $40 US Shipped. http://i1199.photobucket.com/albums/...r/IMG_5801.jpg

Again, all prices include shipping within the continental United States, and of course I’ll eat the Paypal fees. Let me know if you have any questions. You can of course contact by email. My email address is kirk.moorhead@gmail.com. - Kirk

[adam0321]

Any idea where to get s rebuild kit for the oceanic?

[Sludge]

A Scubapro Mark 5 kit oughtta work.

[adam0321]

Hmm I need a reg for my buddy bottle/stage

[atedeschi]

What is your height and weight? Interested in drysuit and undergarments.

[HarleysDiving]

Interested in Halcyon Explorer Wing PM me.

[Kirk]

What is your height and weight? Interested in drysuit and undergarments.

The undergarment is sold (as are 4 of the 6 Apeks 2nd stages). The Dive Rite 905 drysuit is still available. It is again, size medium, "C". I'm currently 6' 0" tall, and weigh a little over 150 lbs, though have weighed up to 165 - 170 lbs. with this suit. Regardless, 6' is pretty much the maximum for this suit (though frankly never wished it would allow for more), but I could put on a lot a weight, and there would still be plenty of room in there. My primary undies are Weezle Extreme Plus, which are pretty puffy. Let me know if you have further questions. - Kirk