Welcome to the Cave Diver's Forum.
+ Reply to Thread
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Jan 2005
    Location
    San Francisco, CA
    Posts
    434

    Default Scubapro regs MK 2+, new in box, $200-250

    To be available shortly: brand new unused Scubapro regulator ready for registration:

    Your choice of EITHER

    Item 1) Mk2+ piston 1st stage 1HP ports, 4LP ports with yoke fitting (DIN conversion available at extra cost) and R295 2nd stage, complete reg set as shown with connecting hose. Excellent workhorse reg for recreational diving and as a stage regulator in deco/stage applications. $200 (MSRP $293 + tax at LDS).

    OR
    Item 2) Mk25 piston regulator with 2HP ports and 5 LP ports on swivel turret, FIRST STAGE ONLY, also brand new & unused ready for registration. Yoke or DIN available, your choice. This is Scubapro’s top of the line regulator, preferred by technical divers for its flexible hose routing and massive flow capability at extreme depths, but also excellent in recreational application. $250 (MSRP $342 + tax at LDS).

    I am asking $200 for item (1) or $250 for item (2). Your choice.

    Buyer pays shipping/insurance or picks up and is responsible for warranty registration etc. with the manufacturer. Seller only warranties that regulator is brand new and as described. Note that the manufacturer supplies both regulators as suitable for service up to 40% nitrox without further cleaning.

    contact NeilBenjamin@yahoo.com

    Last edited by cavedivingwoman; 04-16-2010 at 01:15 AM. Reason: typo


 

Similar Threads

  1. FS - A box of DIN Scubapro
    By Terry D in forum Gear Exchange
    Replies: 9
    Last Post: 08-18-2009, 11:32 AM
  2. scubapro mk25 w/s 600 & apeks ATX 200 w/tx50
    By Divin' Devin in forum Gear Exchange
    Replies: 2
    Last Post: 04-17-2009, 08:20 AM
  3. Scubapro MK25 & G250 regulator FS $200
    By Sumper in forum Gear Exchange
    Replies: 1
    Last Post: 03-08-2006, 04:51 PM
  4. Replies: 3
    Last Post: 12-12-2004, 09:42 AM
  5. FS: Scubapro 200 bar DIN Isolation manifold O2 clean
    By amphipod06 in forum Gear Exchange
    Replies: 0
    Last Post: 11-16-2004, 11:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts