DIY Canisters For Sale

[darkdiver211]

As I told Hector when my light arrived, I hope it works as good as it looks.
It was great, I had it in the Caves last week with the Gang from Dayo and everyone that saw it liked it and one of them wanted to take it. The workmanship is great, you can tell that Hector takes the time to make each light as perfect as it can be. I have been telling my buddies that this Cree LED is the way to go.

I'll be mailing your sweatshirt out as soon I get them in.

Thank you for the great service and a light that will last for years to come.

[350xfire]

Thanks for the great review... I am about to take posession of the newly designed CNC machined heads (canisters are already done) this week which will hopefully end up at the anodizers in a few days.

Hector

[350xfire]

The CNC lights are about 98% done...

[tj]

Well I can attest to Hector's lights working well, last week. I can hardly wait until spring when he returns to Florida with some of his lights to show off...

[350xfire]

Well I can attest to Hector's lights working well, last week. I can hardly wait until spring when he returns to Florida with some of his lights to show off...

Thanks TJ, I'm getting them ready to bring over... I already put a bug in my wife's ear about coming over in April for some more training.

[350xfire]

Guys, I have decided for now to stick with LED technology (at least for the low power stuff).. So, I have a couple of HID prototypes that I will sell at a clearance price.

What you get is basically this:
1. Light head to fit Brightstar HID bulb ballast 12W
2. Brightstar bulb ballast 12W
3. Agro Gland
4. Lens
5. O-rings
6. Cable- 5'

You will need to add canister and battery for a complete unit. Also, if you want a goodman handle I can add for $20. You will need to supply the M4 screws to hold it in place.

This is a DIY project for which no warranty will be available. Other than if the HID bulb fails to ignite.
Price: $270 each shipping in US and Paypal included
Note: Normally I sell a head for $200 by itself.

Second picture:
Set of modded maglites with 3 LED and 5 LED modules. These are both really nice and bright. I just happened to have these parts laying around and decided to carry out the mod. Now I have no use for them so you get them cheap...
What comes with each:
1. Mag Lite body (one is a C Cell the other one a D Cell)
2. Modded 3 LED or 5 LED reflector assembly with drivers
3. Larger Tail cap o-ring
4. Glass lenses. Two 2"D x 1/16"T stacked
5. 5' cable.
This is a DIY project in the works and again no warranty. You finish putting it together and end up with a great light.
Price: $75 each. Shipp + PP included

[350xfire]

Guys:
Just wanted to inform you of a small problem with the lights I have shipped. It seems that Fastenal doesn't know that the hose clamps they sell from IDEAL are not stainless with stainless screw as this is what I asked for. As a result, I have had one complaint of a rusty clamps.

Rest assured that at this very moment I am packaging clamps to EVERYONE that has purchased a light or a canister that did get the BREEZE brand clamps. The new clamps, I can assure you are stainless stainless!

I am truly sorry for this mistake.

If you have purchased a light or canister and don't get clamps in 3-7 days, please let me know and I will replace them free of charge, even if they are not rusty... You can even keep the old ones!

[AB8CD]

Yeah... and my light grew shoots out of it... No wait! That was a potato that I left in my dive bag... How did THAT get in there?

Thank's again Hector for the great service!

[bob1577]

Hector,

Let me have those heads for $75 i have a lights but the bulb is gone and i might be able to make something with those for it ok . Its a 12 volt output.

Hope my other light is still ongoing and you have not given up on it yet.

thanks again bob

[350xfire]

Hector,

Let me have those heads for $75 i have a lights but the bulb is gone and i might be able to make something with those for it ok . Its a 12 volt output.

Hope my other light is still ongoing and you have not given up on it yet.

thanks again bob

Bob:
Both of those were designed to work with 2 LiIon running at 7.2 volts.

I am still working on a high power LED but having issues tightening up the beam. Still searching for adequate reflector.
Thanks
Hector