FS: Two Faber HP 100 Tanks

[pwl4476]

I'm ready to part with two Faber HP 100 tanks. The date of the first hydro is 2000. The second in 2005 has a bit over one year remaining. The tanks have a fresh O2 cleaning and vis from Amigos, done at the beginning of this month. Not one spec of dirt or corrosion inside. They have Thermo 200 bar Pro din valves (and the yoke inserts) that are 6 months old (or less). There's barely a scratch on them and the black plastic boots come with them. They honestly were previously owned by a lady from Jacksonville (she was little, but not old.)

I'm likely to drive down to High Springs and/or Marianna around mid-September and can meet there or on the way from Kansas City. Or the tanks can be picked up in the Kansas City area (we can meet somewhere within an hour of KC). Or I can ship them.

I'd like to get back the $500 that I have invested in them, but I'm open to offers if that's too much.

Thanks,

Paul

[pwl4476]

In response to a request, here's a picture of one of the tanks and the dimensions of both. Both tanks are identical in appearance.

The valves are about 3" in length when installed and the tanks are about 24" in length, so the total is a shade over 27" from top to bottom. The diameter is 7.25"

[pwl4476]

Nothing solid so I'll lower the asking price to $450 for the pair with valves, $400 without valves. Will sell individually as well.

Thanks.

[pwl4476]

Lowering the asking price to $400 for the pair with valves.

pl

[Puttzer]

Lowering the asking price to $400 for the pair with valves.

pl

Quick: someone compare the faber HP 100 to the faber LP85's.
that is: length, weight and buoyancy characteristics

[Doctor H]

Quick: someone compare the faber HP 100 to the faber LP85's.
that is: length, weight and buoyancy characteristics

I'm more than sure you can do this on your own.

[Puttzer]

I'm more than sure you can do this on your own.

LOL

Fine, I'll put my beer down and get off my butt and do it myself.

[Sludge]

Richard, don't search HP-100. That's not what these are. They're FX-100.

I've been staying out of this because people call me a jerk when I correct misinformation, but an HP-100 and an FX-100 are not the same cylinder.

[bottomtime]

Richard, don't search HP-100. That's not what these are. They're FX-100.

I've been staying out of this because people call me a jerk when I correct misinformation, but an HP-100 and an FX-100 are not the same cylinder.

JERK
COULDN'T RESIST
BUT YOU ARE CORRECT
and couldn't resist thanks David
just toooooooo much funnnnnnnn

gotcha,,,,,,

[MORGAN]

I've been staying out of this because people call me a jerk when I correct misinformation...

Don't stop now, Sludge; half the reason I read the CDF is to have my misconceptions rectified!

Mike