FS - A box of DIN Scubapro

[Terry D]

Still cleaning house. 2 MK10, 1 MK8, 1 Oceanic MK10 look-a-like. All in clean,
rebuildable condition and all have DIN conversions.
$45 ea or 150.00 takes all.
Paypal preferred.

PS. I have an adjustable 2nd stage (the early G-250) I'll toss in with the bundle at n/c.

[DA Aquamaster]

The Mk 8 looks like a Mk 9 but I'll take it.

The Oceanic is a Mk 5 clone, not a Mk 10 clone. Still a great reg though. The Mk 5 was one of the most copied regs in history.

Shipping will be to 22203

Let me kow your paypal address and I'll get payment out today.

-----

From left to right they are:
Mk 5 clone,
late production Mk 10 (Mk 10 Plus if the seat carrier has a bead blasted finish)
Mk 5
Mk 9 (a Mk 10 with a non-swivelling cap, the Mk 8 was a Mk 5 with a non swiveling cap that had only 4 ports rather than 5.)

The easiest ways to tell a Mk 5 from a Mk 10 are; 1) the metal versus plastic trim piece below the yoke of DIN connection and 2) the presence of holes for the ambient chamber is the swivel cap versus in the main first stage body.

The Mk 5 uses a larger diameter piston head and has a bit better response time while the Mk 10 is supposed to have a bit more flow rate. I actually prefer the late production Mk 5 (5 port swivel cap and 2 7/16" HP ports) to the Mk 10, but hard part support (new pistons etc) is a little better for the Mk 10, and it is over all more popular. Both are great first stages and all of the above appear to be in great shape.

[Terry D]

THANK YOU for the great information.

PM sent.

[Terry D]

The MK9 is sold. I'll sell the other three with the 2nd stage for $120.00 or $45 ea.

[fire diver]

are the Mk10s 230 or 300 bar din?

[Sludge]

There's only one Mark 10 (second from the left) and it appears to be 300BAR.

[Sludge]

Heck, if you'll take PayPal I'll take the rest of the lot. PM me.

[Terry D]

Yes, they are all three 300 bar DIN

[Sludge]

Regs are sold.

[Terry D]

Yeah, what he said.