WTB: Poseidon rebuild tools

[White-Trash]

where is the cheapest/easiest place to get the specialty tools to rebuild poseidons? I need the wrenches for the odin second stage as well as the stand for the first stage. Thanks 4 your help

Try Peter Built. www.scubatools.com They don't list Poseidon, but e-mail them to see if they have anything.

Russell

[Deep-Thief]

where is the cheapest/easiest place to get the specialty tools to rebuild poseidons? I need the wrenches for the odin second stage as well as the stand for the first stage. Thanks 4 your help

What wrenches do you need for an Odin second? The allen should be 1.5mm and you can use cresent wrenches for the rest. To adjust the pilot valve out after its all back together try using some forceps to go down in the mouth piece.

As for the block for the first stage, yea it sure would be nice but if I remember from the class I took it was rather expensive. If the first is newer than it has 3/8in ports, if its old and has metric this won't work so please don't try it. IF you have the 3/8 get an old thread type CO2 cartridge that has been punctured and screw that into a port. It makes for a great handle to hold the first while servicing and is a hell of a lot cheaper. This does work on all firsts with a 3/8in port. Just my two cents worth of how I service mine.

On another note - If you are looking for some THIN head wrenches to work on your regs with. Craftsman has some that are called Tappet wrenchs and come in a set of 4 for I think about $30.00. That sure beat what my brother paid for some from snap-on.