Printable View
when Im swimming a stage,horizontal of course,the bottom hangs down too low to my liking.I use an aluminum 80 but the bottom doesnt float up at all.My lowerclip is wrapped around the handlestrap to take up all the slack,but I still have to hold the bottle up when Im close to the bottom.Anybody ever use a bungie to hold it in line with the body?Have done a few searches to no avail.Would prefer help from someone other than a cavern diver on this one.
Adding a hitch ring to the bottom corner of your backplate would help hold your stage in position . along with adding a bungie to hold the valve in tight against the body.
But I'm a cavern diver so this might not help.
Randy, I'm going to ask you a stupid question: does the AL80 have a boot on it? Some boots have a built-in weight.
I've never heard of an AL80 not floating bottom-up. I even use aluminum first stages, and they're still bottom-up.
yea Russell it does have a boot on it.No offense to the cavern divers out here Im just looking for experience.
Luxfer & Catalina tanks have slightly different buoyancy characteristics but I wouldn't think it enough to notice all that much.
FWIW, mine are Luxfers and they are all tail heavy (no boot) when filled to around 2800psi or greater. Less than that and the rear/bottom starts to float.
Have you tried moving your waist D-ring further back? I find the position of the waist D-rings are a compromise between ease of clipping on and off and swimming position in the water.Quote:
Originally Posted by stairman
Andy
Andy its as far back as it will go,and its also a luxfer bottle.Quote:
Originally Posted by apitkin
Take a look at the stamp on the crown, is it one of those "mid pressure" 80's? If it is it will be stamped on the tank 3300 rather than 3000.Quote:
Originally Posted by stairman
I don't know anybody that likes those tanks as a stage or buddy bottle, they are a brick.
If this is the case, there is nothing you can do to improve your situation short of selling it and buy a regular 3000psi AL80.
Another question, is it one of those short/fat super 80's? I have no experiance swimming those around.
No offence taken , I'm actually a wreck diver that dives with a stage often. That's where I got my stage experience. If you want to see rings attached like what I suggested ,Go look at Larry G's back plateQuote:
Originally Posted by stairman
Mike it is a 3000 psi.Ill try it without the boot and have thought of Novadivers idea ofconnecting it to the backplate instead of the waist d-ring but thought it would be a pain to hook or unhook.We went over a few things about stages in fullcave class but I didnt think about this one.Since then most of my dives have been backgass only and am just now reliving this minor inconvinence.
Catalina tanks are really bottom heavy and don't work well as stages. Putting a bicycle inner tube on the tank and adjusting the air in it helps the stage bottle to behave a little better, but is a PITA. I like to add a bit of helium to my stages. 30% helium makes a Luxfer tank behave perfectly.Quote:
Originally Posted by mmcauliffe
I wrote a post with some nifty pictures. It covers the evolution of how I cane to mount my stage bottles when diving backmount or CCR. Take a read and let me know what you think.
http://www.quietdiver.com/68/an-appr...backplate.html
Hans
A trick I learned recently - have two D rings, and change it as it empties. One ring can be waay back, almost like a SM mount point. The next one can be in a more conventional position. At the beginning it'll hang DOWN and flat, at the end UP and flat. Very cool!
...And sicne you're at it, consider using an SM type bungie at the top. Basically sidemount the thing. It'll be much more out the way.
Edit - just read Hans' post. That's even better!
I've got a Luxfer and a Catalina as stage tanks and my Luxfer seems to be more tail heavy than my Catalina. Significantly so. I'm in the process of changing tanks around and converting some of my student tanks that are Catalinas into stage tanks and using the Luxfers as student tanks. As for correcting the problem, because my Catalina starts out tail heavy, I'm working on carrying my bottles behind me...but I am diving sidemount so that wouldn't work for backmount. If I were still backmount, I'd try carrying them like sidemount bottles. Clamp a d-ring onto your left bottle close to the front and clip your stage bottle to that.Quote:
Originally Posted by Al
Stairman, due to having a small waist stages would lay similarly on me... What I ended up doing is using the Armadillo Butt plate and using bungees mounting it similar to when diving side mount.
The plate is pretty straight forward, those male/female bolts work well for mounting it.
For the bungees, I actually cut a piece of webbing about 4-5 inches wider than the plate, put a grommet in center and 2 grommets on either side for the bungees. Then I drilled a hole in the middle of the plate a few inches down from the top hole that your bolt for you tanks goes though, then using another male/female bolt to attach the webbing to the plate.
Doing it this way the stage tents to "ride" the same way whether full or empty. Nicely tucked away under the arm.
Also keep in mind that you may have to adjust your regulator set up so you can actually see your pressure gauge.
if you want to see pictures or anything send me a PM.
A novel idea on your link there..Quote:
Originally Posted by Luxrok
but I dont' understand why you did some of the things you did it just didn't make sense...
The door handles do stick up and are in the way diving anything longer than 95s depending how high your bands are... but after using the 95s I didn't have any trouble as far as trim and control.
Brilliant!
Quote:
Originally Posted by aainslie
I had trouble reaching around the door handles whether I was using my Megalodon or double 80's. With the double 80's, they actually hit the bottom of the tanks.Quote:
Originally Posted by satchmo0016
Which things confused you? If you let me know specifically, I can spell out my thinking for you or the events that lead to the specific choice.
Hans
Nothing confused me, just some seemed unnecessary to me.Quote:
Originally Posted by Luxrok
I had the same issue with lp85s, and why I went to 95s diving like that.