-
FS Russian KN-4 Booster
Russian KN-4 Booster Pump for sale
Single-Stage/Double-Acting booster pump built for Russian military. Converted to 115/230V 60 Hz US spec motor from Dayton that is currently configured to run on 115V. It will pop a 15 amp circuit breaker at about 3600 psi. With the swap of a few wires and the plug it can run on 230V. Running on 230V it will pump to 4500 psi from experience.
O2 Clean with upgraded Viton seals. Unit comes with extra set of seals, full set of tools and complete set of spare parts.
Price is $2400. Shipping will be extra if pickup cannot be arranged. Shipping will be by commercial carrier and can be arranged through Freightquote.com. The unit will come boxed and palleted, weighs 250 pounds, Freight Class 85, Dimensions 40x24X31 inches. From Washington, DC
http://i1364.photobucket.com/albums/...psobiz6zd9.jpg
-
Washington D.C., eh? Did you get this booster from a Trump campaign worker?
-
-
Tools: Here are all the tools included to keep the unit running in top form.
http://i1364.photobucket.com/albums/...psarjuwzkw.jpg
Spares & Accessories: If you are feeling strong you can attach the arms and pump manually.
http://i1364.photobucket.com/albums/...psiilwlffg.jpg
Spares: Enough spare parts to keep the unit running. Each paper packet is a set of several spare seals, washers, filters, springs, etc. Every consumable part needed
http://i1364.photobucket.com/albums/...ps1nlgnbue.jpg
-
-
-
For transportation unit can come crated and palleted as shown
https://vgy.me/hdVTzg.jpg
-
Price drop on the booster pump to $2000 or make an offer.
-
Dropping the price on the booster pump to $1800.
-
I have had a number of discusions with people concerned about the size of the booster. The dimensions listed above are for the shipping container which is much larger than the pump. The booster itself is only 10" wide X 31" long X 19" tall. The base is only 7 inches wide but the output regulator sticks out a little more making it a bit wider. It isn't small by any means but perhaps smaller than the shipping dimensions suggest. It is roughly the size of an AGT-15/30. Hope that clarifies things.
-
So who is working on their fill station over the winter? I'll drop the price down to $1600. Or send your significant other my contact information and we can make sure this gets to you in time to show up under the Christmas tree!
-
Now that spring is finally here it is time to upgrade your fill station.
I'm dropping the price on the Russian booster down to $1400
https://vgy.me/Tq6rYE.jpg
To sweeten the deal I'll include a second complete set of spare parts to keep the pump running.
https://vgy.me/TGLVLZ.jpg
I also have a number of major components like the gear box, a spare head, extra drive gear, entire spare inlet assembly pressure gauge, crank shaft. Everything needed to keep things running even if something major goes wrong.
https://vgy.me/3EwxkY.jpg
-
Dropping price on the pump to $1200
-
