Looking for a 7/8 left hand valve for one of my tanks. Let me know if you have one to sell. Thanks!
Sent from my SM-G930V using Tapatalk
Printable View
Looking for a 7/8 left hand valve for one of my tanks. Let me know if you have one to sell. Thanks!
Sent from my SM-G930V using Tapatalk
DIN or yoke?Quote:
Originally Posted by scubajohn87
Sent from my XT1254 using Tapatalk
Din... sorry should have put that
Sent from my SM-G930V using Tapatalk
no need to. 7/8 valves were never made in yokeQuote:
Originally Posted by scubajohn87
I was on NESS page yesterday and thought I saw some there.
I'll check. I think I have a couple from the tanks I doubled up.
Sent from my XT1254 using Tapatalk
I have two. Thermo 3500 psi. And to be clear 7/8 is smaller opening
Sent from my XT1254 using Tapatalk
If those were in singles, I suspect they are both right hand valves.Quote:
Originally Posted by thebigdiver
Yes. Cane of singles.. sorry. Just went back and realized you needed left hand
Sent from my XT1254 using Tapatalk
Left hand 7/8? You'll find them in any shop right behind the hen's teeth.
By now, you've probably realized that the valve you're looking for is pretty much non-existant, HOWEVER, the work around is for you to purchase an entire 7/8UNF manifold and then plug the left hand valve. I have several of these ( none for sale. ) These manifolds are not as common as the typical Dive Rite, Thermo and others, but you see them on the forum now and then. Check e-bay as well.
Is it possible to get the plugs? I know some 3/4 manifolds have plugs that are hard to get.Quote:
Originally Posted by Brent
the only ones that can't be plugged are the Sherwood manifolds because the design doesn't allow for itQuote:
Originally Posted by FW
https://treading.files.wordpress.com...20156497_o.jpg
they look like that
The other ones that are fairly common are the OMS manifolds that look like this
http://s24.photobucket.com/user/Pain...b42e5.jpg.html
the caps for these manifolds are VERY hard to come by and are very expensive if you can find them, but they are the same as the 3/4" manifolds.
These are unfortunately two of the more common 7/8" valves, and the other brands that are easily plugged are very difficult to find. With sidemount as popular as it is, I'm with Brent, you have to find a set of doubles or even just the manifold for these tanks and then plug them because I don't know anyone *myself included* that has valves for the HP PST tanks that will get rid of them
Remember those plugs I got for you last year? I've still got a bucket full of them!Quote:
Originally Posted by FW
Yes, but they were for a 3/4" manifold :-) I assume the 7/8" take the same plugs.Quote:
Originally Posted by Brent
The manifolds that Dive Rite sold, back in the day, take the same plug as the 3/4 SAE manifolds. Not sure about the "other" manufactures.Quote:
Originally Posted by FW
Thanks for all the info! I do have a manifold. I'll check and see what brand.
Sent from my SM-G930V using Tapatalk