Gradient Factors on Shearwater Predator
I finally bought a shearwater predator (which I love) and I need some help. Since I've started doing cave dives that require deco stops I've always set whatever computer I've owned to a more conservative setting then how it comes right out of the box. It looks like the only way to do this on the predator is by adjusting the gradient factors. And I don't know anything about gradient factors. :(
Can someone please help explain gradient factors in simple terms? And if you have the ability to change the gradient factors settings on your computer, what do you use and why?
Just to be clear, I do plan on taking a deco class a little later but until then I'd really like to make sure my computer is set to be a little more conservative than just plain default, which on the shearwater predator is 30/85. For all I know this could be a good setting, but on my dive last night my DR duo (backup comp) said I had 10 - 12 minutes of deco and the predator said I only had 3 minutes.
Thanks in advance for your help.
gradients according to Garf (GUE instructor)
After poking around on the internet, I found the following comments by a GUE instructor. (I hope I am not violating any type of content ownership by posting his comments here.) I don't like the GUE mindset, nor do I want to place them in a position of authority, to be looked up to, but I really do feel they have it right when it comes to topics and discussions of decompression. I may make fun of their "don't dive with a computer" mentality, but I yield to their understanding and comprehension of diving safely with tables. I chose the GAP software partly because they recommend it (ooop, I'm a little too close to the publicly supporting them.)
dean
You can view the comments by Garf and the chart he refers to from the link:
http://www.yorkshire-divers.com/foru...explained.html
I posted this "in another place" but someone has asked me to put it here too". Everything correct in this post is down to Mark Powell. Everything incorrect is down to me playing pool with finn whilst Mark's students listen in to the lecture
Gradient Factors explained.....
OK
Now we all know that as you descend the ambient pressure of the gas you are breathing increases. Also as you descend, the pressure of Nitrogen, or other inert gases, in your tissues increases, as your tissues become saturated. Stay at a given depth for long enough, and some of your tissues become fully saturated, IE the pressure of gas in your tissues has equalised with ambient pressure of gas you are breathing. this is the point where you stop ongassing. As you begin to ascend, the pressure of gas in your tissues becomes larger than the ambient pressure in the gas you are breathing, and you begin to offgas.
Let's imagine you have a graph, like the one below. Its really crap, so bear with me.
The line marked "saturation" - the blue one at the bottom which really should be in the middle of the graph - indicates the point where the ambient pressure meets the tissue pressure. This means you are not ongassing or offgassing, but have reached a point where thepressure of ambient gas (eg Nitrogen) around you has equalised with the pressure of ambient gas in your tissues. This will obviously be a different depth for each tissue compartment but let's just pretend the body has one tissue compartment to make it simple.
Now everything below that line to the right hand side of the graph means you have greater ambient pressure than tissue pressure. This means you are ongassing becuase your tissues have not equalised with the pressure of inert gas in the gas you are breathing. Everywhere above that line means the tissue pressure is greater than the ambient pressure. Hence you are offgassing. This is known as the "deco zone", as when we are in this zone we are decompression. We get to this zone by lowering the ambient pressure -ascending.
Now, obviously, we all need to offgas during the ascent on a dive, and the more into the decozone we go, the faster we offgas. However, there comes a point where you are offgassing too much. This is the point where the tissue pressure is so much greater than the ambient pressure that bubbles begin to form in your tissues - ie you get bent. Now, the point where this happens is a theoretical line called supersaturation, or the "M value".
Now ye old buhlmann tables took you straight up from a deep dive to the M value, and kept you there until offgassing was complete, hence the reason many people refer to them as a "bend and mend model". This had the advantage of getting you shallow fast, and offgassing fast, but really took you to the edge of being bent. This is why buhlmann tables, and buhlmann based computers, such as the suuntos, get you very shallow, very fast. This is also why many people consider Suuntos to be far too aggressive for decompression diving.
Now, lets call the point of saturation, where everything is equal as being 0%, and the point of supersaturation, or M value, where we are on the point of being bent, as being 100. The fact that buhlmann tables take you straight to the M value means that you are being taken immediately to 100% of the distance between saturation and the M value, hence the reason buhlmann tables are often called 100/100, becuase all of the stops are done at this 100% point. However. There is a "grey area" around the M value, as it is only a theoretical line, and the problem is the many people feel like **** diving buhlmann tables, and indeed people got bent. So Gradient factors were introduced as a fudge to make the model safer. Gradient factors are represented by a LOW factor figure and a HIGH factor figure, which sit as two lines betweem the point of saturation (equilibrium) and the point of supersaturation (whoops I'm bent). the intention is to keep you in the deco zone but stop you getting too close to the M Value
The LOW figure represents the percentage of the distance from the equilibrium to the M Value at which we will start our stops. Thus 10/90 gradient factors mean we start our stops very deep indeed at only 10% of the distance to the M Value. 30/70 gradient factors mean we start our stops 30% of the way towards the M value, ie a little shallower. The lower the value is, the more deep stops we will do during our ascent.
The HIGH gradient factor represents the maximum percentage we are willing to go between the point of saturation and point of supersaturation before hitting the surface. For example, 20/80 means we will never go above 80% of the way towards the M value during our stops, and will break the surface without going over that 80% limit. 10/90 means we go a little closer to the M Valu. Obviously, the higher this figure, the greater the difference between tissue and ambient pressure, and the faster you will be offgassing, but the close you are to that theoretical "bend" point, and let's not forget about that grey zone around the M Value, so its in our interest to hang back from it a bit.
What factors you use is purely empircal, at least in the non-DIR world. Whatever makes you feel good are the right factors to use. A very low LOW factors will mean you will make lots of deep stops, but will not be offgassing quickly so will have a longer deco. A very high HIGH factor will mean you are offgassing quickly, but are moving towards the M value, a bad place to be. the most popular combinations are things like 20/80 and 10/90, which sort of combine the best of both worlds, although you do hear of people doing mad combintations of greater than 100%. If it works for them, great, its only a theoretical model after all.
Anyway, that's gradient factors.
Garf
