SS D-rings wanted (low profile)

Quote:

---

Originally Posted by DaveP

Thanks,
Ya something did not sound right with the dimensions I was given.
Once I get the D-ring info I will be ready to order all the pieces to make a new harness.
I'm interested in the following 2" D-rings:
DRHW1062
DRHW1062Bend
DRHW1063 (low profile)

Also does DGE carry any small pieces of UV resistant bicycle tubing (to place on the harness to hold hoses / backup lights down etc).
Thanks,
Dave

---

No, but you could order the shoulder pads (part# DR-BC1086B) and cut them to length. Their a piece of neoprene, sewn to make a tube, exactly like the crotch strap pads so I would recommend using Aquaseal on the stitching before cutting them so they don't unravel. You could easily get 6 rings out of each shoulder pad for a total of 12. Scroll to the bottom of this page http://www.divegearexpress.com/bcs/backplates.shtml

Don't forget the belt slides and quick release buckle ;)

I wonder if I get paid OT for this :smt081

Quote:

---

Originally Posted by DaveP

Also does DGE carry any small pieces of UV resistant bicycle tubing (to place on the harness to hold hoses / backup lights down etc).

---

Extreme Exposure has them.

Low Profile D-Ring ~ Extreame outside (3/16 dia. wire) dimensions are 2-1/2" x 1-3/8".

Standard D-Ring ~ Extreame outside (3/16 dia. wire) dimensions are 2-1/2" x 2-1/8".

Thanks for the help guys!
I ordered everything to build my new harness from DGE. Hopefully I can get EE to mail a few EPDM rubber bands to me. Thanks