Apeks harness, wing

My wife finally found a rig that fits her (Transpac with Classic Wing, great for short women with big boobs & small waist), so she's selling her original cave diving gear (used MINIMALLY).

Descriptions are from Apeks.

-------------------
Apeks WTX Deluxe Harness-Medium: $185. (Paid $385) Used 5 dives for cave diving class.

• Can mount directly to a single cylinder using dual nylon cylinder bands.
• Can accept an Apeks back plate for heavy loads such as twin steel cylinders.
• Multiple grommet settings on the waistband allow the attachment of the SureLockTM weight system.
• Open shoulder design allows diver to add or remove hardware for total customisation.
• Made from rugged 1000D Armorshield Cordura.
• Removable crotch strap made of 2” webbing.
• 6-two inch stainless steel D-rings (2, angled, on shoulders, 2 on the hips and 2 on the crotch strap)
• 6-one inch stainless steel D-rings along the sides accommodate light canisters, argon bottles or other accessories.
• 2-one inch stainless steel D-rings along the lower back are for marker buoys, reels or other accessories
• Removable back pad
• Heavy duty waist buckle
• Stainless steel triloaders distribute the load between the back, waist and shoulders
• SOLAS reflector airway hold-downs can be removed or repositioned.
• Chest strap comes standard.
--------------------

Apeks WTX 60 Wing: $225 (Paid $385) Used 5 dives for cave diving class.

• Outer bag constructed out of ArmorshieldTM Cordura to resist abrasion and fading.
• Inner bag constructed from mil-spec welded fabric. This is the same fabric
used in survival vests worn by US fighter pilots.
• Inner bladder protected from zipper with V-diamond rubber.
• Pull dump on inside lower left
• Optional pull dump may be added to inside lower right
• Highly efficient drains empty water quickly after the dive.
• 3 upper grommets allow various height settings coupled with a
lower slot that compensates for misaligned band bolts.
• The airway comes off the top back centre of the cell. A safety
cable inside the elliptical hose prevents hyperextension of the corrugated hose.
• Features the Apeks technical inflator with brass buttons
----------------------

Apeks Stainless Steel Backplate: $85. (Paid $165). Used 5 dives yada, yada, yada.

• Made of 316 stainless steel.
• Weighs approx 5 lbs (2.2 kg).
• 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot.
• 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned.
• 2” wide crotch strap slot.
• Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories.
• Textured, electro-plate finish and a laser-etched Apeks logo round out the look of the plate
-----------------------

PAYPAL ONLY. Buyer pays shipping.

SOLD!