FS Russian KN-4 Booster

Russian KN-4 Booster Pump for sale

Single-Stage/Double-Acting booster pump built for Russian military. Converted to 115/230V 60 Hz US spec motor from Dayton that is currently configured to run on 115V. It will pop a 15 amp circuit breaker at about 3600 psi. With the swap of a few wires and the plug it can run on 230V. Running on 230V it will pump to 4500 psi from experience.

O2 Clean with upgraded Viton seals. Unit comes with extra set of seals, full set of tools and complete set of spare parts.

Price is $2400. Shipping will be extra if pickup cannot be arranged. Shipping will be by commercial carrier and can be arranged through Freightquote.com. The unit will come boxed and palleted, weighs 250 pounds, Freight Class 85, Dimensions 40x24X31 inches. From Washington, DC

http://i1364.photobucket.com/albums/...psobiz6zd9.jpg

Washington D.C., eh? Did you get this booster from a Trump campaign worker?

Here are some more pictures
Pump
http://i1364.photobucket.com/albums/...psrab3l6ui.jpg

Motor
http://i1364.photobucket.com/albums/...psbjirdvga.jpg

Inlet
http://i1364.photobucket.com/albums/...pscqoff9zj.jpg

Tools: Here are all the tools included to keep the unit running in top form.

http://i1364.photobucket.com/albums/...psarjuwzkw.jpg


Spares & Accessories: If you are feeling strong you can attach the arms and pump manually.

http://i1364.photobucket.com/albums/...psiilwlffg.jpg

Spares: Enough spare parts to keep the unit running. Each paper packet is a set of several spare seals, washers, filters, springs, etc. Every consumable part needed

http://i1364.photobucket.com/albums/...ps1nlgnbue.jpg

Thanks to photobucket for blocking all of my pictures

Here they are at new link

https://vgy.me/Tq6rYE.jpg

https://vgy.me/lUte88.jpg

https://vgy.me/tJDD6h.jpg

https://vgy.me/RWf7NN.jpg

https://vgy.me/ZT9lao.jpg

https://vgy.me/zAx1q9.jpg

https://vgy.me/TGLVLZ.jpg

Price Drop to $2200

For transportation unit can come crated and palleted as shown

https://vgy.me/hdVTzg.jpg

Price drop on the booster pump to $2000 or make an offer.

Dropping the price on the booster pump to $1800.

I have had a number of discusions with people concerned about the size of the booster. The dimensions listed above are for the shipping container which is much larger than the pump. The booster itself is only 10" wide X 31" long X 19" tall. The base is only 7 inches wide but the output regulator sticks out a little more making it a bit wider. It isn't small by any means but perhaps smaller than the shipping dimensions suggest. It is roughly the size of an AGT-15/30. Hope that clarifies things.