-
Nitrox Blending Stick
I have a used Nitrox Blending Stick for input to a high flow compressor. This was was hooked up to my Bauer K14 (14CFM) compressor. Works AWESOME! I am upgrading to a new a new stick that has Helium inputs. The Weld broke holding the mount to the stick when it was mounted but does not affect operation and was repaired with pipe clamps. This has a mount to hold the Oxycheq Expedition Analyzer and the R17-S Sensor. I will include them for an additional $250 (The cost to replace) so you can just purchase your own. This stick features a precision flow meter for accurate Control of Oxygen up to 40% (And above if yo are suicidal) as well as a solenoid valve which shuts when compressor turns off to prevent flow of Oxygen into the stick with no compressor power to prevent loud bangs when the compressor comes back on....(Nitrox above 40%). I'm also adding an older Oxygen regualtor and hose to input your Oxygen at 30psi. I'm willing to let this go for $500 ($750 if yo also want the Analyzer and Sensor), I paid over $1000 for it a few years ago. Buyer will pay actual Shipping and handling or I can arrange to meet in Pensacola area, or Marianna/High Springs on a cave diving weekend.
You can contact me at barry.shively(at)gmail(dot)com
http://i511.photobucket.com/albums/s...psspfyy5to.jpg
http://i511.photobucket.com/albums/s...psyno9s3r8.jpg
http://i511.photobucket.com/albums/s...psdtjkrypr.jpg
http://i511.photobucket.com/albums/s...psykocvgc7.jpg
barry.shively@gmail.coom
-
-
Looks like an Ed Paradiso stick. I made my own stick and he hooked me up by tapping in the flowmeter and oxygen solenoid.
Thats an awesome quality stick. I'm tempted to get it from you for when I eventually start mixxing helium. Put that one before the intake on the nitrox stick. Unfortunately I'm aftaid it'd just sit on my workbench forever instead of getting used
Sent from my iPhone using Tapatalk
-
-
-
